Here in the picture you see every single darn piece you need to assemble a bike. I will have the wheels built for me, and the rest I'll do myself.
I'm locking this so I can have sequential updates of the build progress, then I'll unlock it.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild02parts.jpg)
Here is the frame I'm going to use. Sorry about poor pic. I'll make sure to have a decent one when it's finished.
A couple of cool things about this frame. It is a 1991 specialized stumpjumper S-works. It was also NEVER BUILT! So essentially I got a '91 frame in mint condition. How awesome is that?
Cool thing number two. I purchased it from Eschen, Liechtenstein. This is a very small country (62 square miles) located in Europe. It is bordered by switzerland and austria, and it is ruled by a prince.
So maybe I'll call the bike Princess :)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild05frame.jpg)
Headset/fork done. The cups and race were already on (luckily, since I don't have the tool to put them on), and the headset was brand new, so I just greased it up and put it on.
Minor drawback, I need to put on a front brake cable hanger on the steerer tube, but the steerer tube is cut pretty short, I'm going to have to find a cable hanger that is only 2mm thick. I haven't seen one on the net. They don't make 1inch headset tubes anymore, I have to find old stock.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild06fork.jpg)
Bottom bracket done. Went on beautifully. So easy. My first one. I think externally threaded bbs must be easier. Or probably it was the fact it was sealed and I didn't have to mess with bearings.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild07bb.jpg)
The top steerer tube is cut pretty short, leaving me very little space to add a front cable hanger. I needed one where the ring is only 2mm thick. Couldn't find one online, so I put together some parts lying around and took them to the local bicycle commuters yard, and donated my parts so I could scrounge through their parts. I managed to find one off a 10-speed.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild08.01frontcablehanger.jpg)
Stem and handle bar on, also the front cable hanger, now painted black. Handlebar was cut to a length of 20 inches.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild08.02stemandbar.jpg)
Wheels.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild09wheels.jpg)
Brake cantilevers on. For those with a fine eye, yes I have my brake shoes reversed. This, plus "toeing" them in towards the front, gives me superior and quieter stopping power, IMO.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild10cantilieversfront.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild10cantilieversrear.jpg)
Brake levers and shifters on.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild11levers.jpg)
Cable housing and wiring all done for brakes.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild12brakeswired.jpg)
Cranks, before and after
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild13cranks01before.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild13cranks02after.jpg)
Some cassettes come apart easily with an allen key. Others you need to punch the rivets out. And still others, like mine, need the old grinder!
So I took mine apart with a grinder and I wrecked the largest sprocket in the process. That's ok, I just went to bike store to buy a spare.
Why take it apart? My shifters are these '90-'95 shimano 7speed index thumbshifters. Though 7speed, they came with a magical 8th shifting slot. So hypothetically you should be able to use an 8 speed cassette right? Unfortunately the 7 speed indexing does not give you smooth shifting with an 8 speed cassette. Solution (sort of), take apart the cassette and put wider spacers in-between the sprockets.
But I have another limitation, my rear hub is for a 7/8 speed cassette, meaning there is not much wiggle room when making the cassette wider. Here's the sprocket/spacer combination I used to get smooth shifting.
| sprocket | 30 T (tooth) |
| spacer | 3 mm |
| sprocket | 26 T |
| spacer | 3.28 mm |
| sprocket | 23 T |
| spacer | 3.5? mm (estimated) |
| sprocket | 20 T |
| spacer | 3.5? mm (estimated) |
| sprocket | 17 T |
| spacer | 3 mm |
| sprocket | 15 T |
| spacer | 3 mm |
| sprocket | 13 T |
| sprocket | 11 T (with attached spacer) |
The two estimated ones did not have a number stamped on them, but visually I could see they were wider. I got these by again going to the bicycle commuter store and rummaging though old cassettes. I walked away with 6 hard-to-find spacers for $2, can't beat that :)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild14cassette.jpg)
Rear derailleur and chain.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild15chainandrearde.jpg)
Front derailleur.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild16frontde.jpg)
Bar ends and grips.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild18barends.jpg)
Seatpost.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild19seatpost.jpg)
Seat and bottle cage. Wow, done! Time for some showroom pics.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild20seat.jpg)
introducing princess.
Click on pics for larger image.
Thread now open for posts.
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild21profile00.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild21profile01.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild21profile02.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild21profile03.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild21profile04.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild21profile05.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild21profile06.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild21profile08.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild22brakes.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild22cranks.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild22frontgear.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild22rear.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild22rims.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild22seat.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild22shifters.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild22specialized.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild22stem.jpg)
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild23shot.jpg)
princess and deirdre
(http://www.birdieman.com/pics/forum/stumpjumper/sbuild24twins.jpg)
That chain looks special. does is even need lube?
lol it's just brand new. It does come with a slight lubrication coating. But I'll oil it it up before the first ride.
I presume that is the finished work minus minor tweaks then correct? I know what you started with. I know some of what you did. I know you have done this before and if you did it again you liked doing it I suspect. It looks to me like a long distance endurance run type speedster of some sort. I wonder if you won't build another one or two and sell them or could you? The main thing I hope is that it brings you happiness and that you don't hurt yourself on it. How many gears? I saw some section about a mythical gear sequence that you thought you might obtain with thicker spacers or something like that. Did you get it done? Are you happy with it now that it is complete?
It is done. Just the usual perfection tweaks to do once it hits the road a few times. It shifts great up on the stand, we'll see how it does once I get it on the road.
Though it is a mountain bike, I put speedy tires on because I will ride it on city roads and hills. I will do hills on it for cardio.
I am very stoked about this bike, personally to me it is priceless. A mint condition '91 specialized frame (in my size too), some old stock parts that were never used, a complete custom combination of parts, black theme for all the parts... she is a one of a kind.
Building a bike from scratch ain't cheap though when you use good parts. I would love to do it again, in ooooh, let's say the year 2017.
I have a guy at work that rides in most days. He lives about 25 miles away. he builds his own bikes too. He enjoyed your display here. I'll try to get a bunch of pics of his bike and post them here.
You're not saying he rides 25 miles to work, are you? My ride is 4 miles one way. It's a nice ride, mostly suburbs, I only have 4 traffic lights the whole way. I ride casually in the morning so as not to sweat, takes 25 mins, then I blast home for the cardio benefit, takes between 15 and 20 mins, depending on the luck with the lights.
Yes. I'm saying 25 miles one way. It is sort of funny too that he is such an enthusiast that if he can't ride in because of rain or something, you can tell he is less happy all day long.
He normally comes in a sweaty. Goes to the restroom and cleans up and changes clothes and then looks normal. At 4:30 he suits up in the spandex shorts and all of the cyclist gear and walks his bike back out of the office. Pictures coming soon I hope.
I used to fantasize about building a kit motor bike. ;)
I really like the way you put together the front gear set. It looks very visually attractive. I also really like the way it says "Made in Canada" on each piece. That phrase is so rarely seen nowadays. When I was a kid I'd see it all the time. Now not so much.
I was using a tool to do something the other day. It was a very old tool that my parents must have bought many decades ago. I live in their house that I inherited along with all the stuff that they had accumulated. I have many antique bits and pieces of just about everything. They all say "Made in Canada" or "Made in USA" on them. One does not often see the kind of quality that has made them last for more than 50 or 60 years any more either.
May your new bike outlast you, and perhaps your children too. :) ;D
Thanks for comment on front gear set. There and throughout the bike I went for subtle and classy, so most parts are black-themed instead of silver-themed. The black "made in canada" chainrings look awesome.
I hear you on the quality of things. I'm a thrifty guy who doesn't need flash, so if something works I don't have to replace it with something new just for the sake of it. I have some wood ikea desk/shelves/cupboards from 30 years ago. These days, ikea stuff is corkboard crap. Bought a spare desk from them about 5 years ago, shortly after I bought it I smacked the desktop with my fist - put a big hole in it, lol. No I'm not bruce lee, it was practically cardboard once you could see inside it.
Those new energy-efficient light bulbs? Oh btw they contain mercury, emit enough high levels of harmful radiation to be considered a cancer threat, and they have to be recycled carefully!! But you know where most of them will be going... straight to the dump! Oh my gawd, typical corporation dollars speaking again.
I'll quit while I'm ahead.
Back in '91 they made nice light frames out of STEEL, so ya I'll be giving one of these bikes to my niece in 20 years :)